Produse pentru magnet din (1323)

The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets. Article number:F50C-4016 D mm:50 +0.2/ -0.1 H mm:10 +0.5/ -0.2 d1 mm:8.5 +0.2/ -0.2 d2 mm:22 Force* N:145 Weight g:85 Temperature °C:220

Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material) Article number:F25D-vM4 D mm:25 +0.1/ -0.1 H mm:7 +0.3/ -0.2 K mm:5.2 Thread M:M4 Force* N:36 Weight g:18 Temperature °C:200

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KsM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Following standard colours are available ex stock » transparent: blue, yellow, green, orange, red, black, nature » completely coloured: blue, yellow, green, orange, red, black, white » no nickel – no allergy » attractive design » grip edge for easy detachment » magnets are protected and do not break (possible in case of raw magnets) » usable on both sides (for example for paperclips, pens, scissors) » top / bottom colour mix Alternative to the standard we also offer individual solutions: » Plastic housing in special colours » Printing individually » higher holding force Article number:OM025NdRd00 D mm:25 Packaging unit:5 pieces

These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat Article number:A12A-KwM4 D mm:12 L mm:14.5 Thread M:M4 Force* N:13 Temperature °C:60

Systems for plugging into a groove that keep using locking lug without additional fastening. Article number:MBS56x12x12 H mm:12.2 L mm:56 l mm:53 B mm:12 b mm:11 t mm:2.2 Force* N:85 Weight g:24 Temperature °C:60

FX-R is the series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and guides the magnetic field deep into the material. The magnet system can be switched well in the entire diameter bandwidth and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. With hot workpieces, the deep prism protects the magnet core from overheating. The lifting magnet for shafts and bars.

FXE electro-permanent lifting magnets are equipped with on-board control technology for direct connection to mains voltage - the fast, user-friendly plug & play solution for loads from light to super heavy. Different pole types are available, depending on the material thickness and surface to be moved.

Permanent magnetic chucks type PMNM are high precision plates for clamping small and thin parts for precision grinding and eroding. The low magnetic field height prevents magnetization of the processing tools. The chipboard is activated via a removable hex shifter. Structure: — Neodymium magnet system, steel body — transverse pole pitch 1.4 + 0.5mm — Holding power 100 N/cm2 — Magnetic field height 5mm — Pole plate wearing limit 6mm Recommendation: High-precision chuck for grinding and eroding

FXL Magnetic Clamping TechnologyThe FXL square pole technology is the result of over 20 years of experience in magnetic clamping technology and combines solutions to the most common customer requirements in the highest quality design. Magnetic poles, fed by Alnico and NDFeB magnets, are anchored in a solid, super-stiff monobloc body by means of a tool steel insert with M8 internal thread. The back of the clamping plate remains flat and can be drilled in at all points - for example, for inserting a zero-point clamping system. For this purpose, the magnet system is coated with highperformance resin in a multi-stage process, which has a high mechanical strength and ensures absolute tightness and perfect electrical insulation. FXL magnetic clamping plates can be controlled with our FXL-C control units or with almost all control units from other leading manufacturers.

FXE-T2500/50 and 4000/80 electro-permanent lifting magnet trusses in compact design with onBoard control technology are designed for frequent handling of larger formats. Like FXE lifting magnets, they can be operated directly from mains voltage and are therefore very quickly installed and ready for use. They can be controlled directly on the unit or optionally via remote control. The FXE-T6400/80 electro-permanent lifting magnet truss is a fully equipped standard unit with all options. The truss with 6400 kg max. lifting capacity is equipped with sliding magnetic modules and can thus safely move sheet metal formats from min. 1200mm length to max. 6000mm length.

FX-VV ist der Lasthebemagnet für Profile und heiße Bauteile. Die lange, schmale Bauform ist konzipiert zur Aufnahme von Trägern und Profilen, auch am Innensteg des Trägers, und erreichen schon bei vergleichsweise geringer Materialstärke ihre maximale Haltekraft, so dass auch dünne Bleche sicher gehoben werden können. Dank des 90° Doppelprismas können Winkelprofile jetzt innen und außen aufgenommen oder auch Bauteile gewendet werden. Stahlbauer setzen auf FX-VV.

Permanent Magnetspannplatten vom Typ PMNEO sind superstarke, kompakte Platten für schwere Zerspanung. Teile ab ca. 30x15x6mm können mit max. erreichbaren Haltekräften aufgespannt werden. Auch an rauen Oberflächen werden noch gute Haltekräfte erzielt. Optional können auf der PMNEO Polleisten aufgebaut werden. Dies ermöglicht es, das Werkstück hochzustellen, so dass alle Seiten frei zugänglich sind, auf der Magnetspannplatte durchgebohrt werden kann und mehr Platz für anfallende Späne rund um das Bauteil bleibt. So versinken auch langlaufende HSC Frästeile nie in den entstandenen Spänen. Die Spannplatte wird über einen abnehmbaren Sechskant-Schalthebel aktiviert. Die PMNEO Magnetspannplatte in Bauhöhe 48mm ist so vorbereitet, um Referenzelemente direkt in die Magnetplatte zu integrieren, so dass keine zusätzliche Palette unter dem Magneten benötigt wird.

Pneumatisch betätigte Magnetgreifer vom Typ PNEUMAG sind über Druckluft schaltbare bi-stabile Magnetsysteme. Luftdruck wird nur zum Schalten benötigt. Das Magnetsystem, ist permanent und hält somit auch bei Druckabfall sicher. PNEUMAG Magnetgreifer ermöglichen es dünne, perforierte oder strukturierte Blechteile (ab 0,5mm) aufzunehmen und sicher zu transportieren, was sie speziell für den Einsatz in automatischen und halbautomatischen Zufuhranlagen sowie als Anschlagmittel für Robotergreifer empfiehlt. PNEUMAG ist die Alternative zu Vakuum-Transportsystemen. Geprüft wurden sie an einer St37 Blechtafel mit glatter, sauberer Oberfläche. Beachten Sie, dass je nach Anwendungsfall ein Sicherheitsfaktor von 2 oder 3 eingerechnet werden muss. PNEUMAG gibt es in den Ausführungen Gummiert und Blank. Die Gummisohle soll ein Abrutschen der Last verhindern.

Permanent Magnetic Circular Chuck Type RM, with reinforced ceramic magnet system can be used for clamping bulky and heavy workpieces. The magnetic force is infinitely variable, in the surface incorporated centering grooves facilitate alignment of the workpiece. In the rake face, a center hole can be introduced. Structure: — Ceramic magnet system, Aluminum body, — Max Pole pitch 5+8mm — Holding power 140N/cm² — Magnetic field height 8mm — Pole plate wearing limit 8mm — Switch travel MAG-ENT-MAG 500° Recommendation: Super Strong circular chuck for turning, also for rough parts

Elektro-Permanent-Magnetspanntechnik Die FXL Quadratpoltechnik ist das Produkt aus über 20 Jahren Erfahrung in der Magnetspanntechnik und vereint Lösungen zu den gängigsten Kundenwünschen in qualitativ hochwertigster Ausführung. Magnetpole, gespeist von Alnico und NDFeB Magneten, werden mittels eines Werkzeugstahleinsatzes mit M8 Innengewinde in einem massiven, supersteifen Monoblockkorpus verankert. Die Rückseite der Spannplatte bleibt dabei eben und kann an allen Stellen eingebohrt werden – zum Bespiel zum Einbringen eines Nullpunktspannsystems. FXL Magnetspannplatten können mit unseren FXL-C Steuergeräten oder mit fast allen Steuergeräten anderer führender Hersteller angesteuert werden.

FXL magnetic chucks with pole type 70 are used to securely clamp workpieces from approx. 150x150mm with material thickness from approx. 15mm. Poles of size 70x70mm generate a magnetic field that penetrates approx. 18mm into the workpiece, which is why they are particularly suitable for larger workpieces. Very good air gap behavior also allows uneven workpieces to be clamped securely. In addition, pole extensions with a larger stroke can be used on 70 poles for height compensation. The nominal holding force is a super strong 160 N/cm2 = 7.8kN per pole.

Permanent-Magnetspannplatten vom Typ PMNM sind hochgenaue Platten zum Spannen von kleinen und dünnen Teilen für Präzisions-Schleifarbeiten und zum Erodieren. Die geringe Magnetfeldhöhe verhindert eine Magnetisierung der Bearbeitungswerkzeuge. Die Spannplatte wird über einen abnehmbaren Sechskant-Schalthebel aktiviert. Aufbau: — Neodym Magnetsystem, Stahlgrundkörper — Querpolteilung 1.4+0,5mm — Nennhaftkraft ca. 100N/cm2 — Magnetfeldhöhe ca. 5mm — Abnutzbarkeit der Polplatte 6mm Empfehlung: Hochgenaue Platte für Schleifarbeiten und zum Erodieren

Elektro-Rundmagnete oder Rechteckmagnete zum Einbau in Handlingsanlagen in Verbindung mit einer externen Spannungsversorgung bzw. einem Umpolsteuergerät. Werden verwendet um Schüttgut oder, in abgesperrten Bereichen, auch massive Teile zu bewegen. Die Vorteile von Elektromagnetsystemen in dieser Anwendung liegen in der Steuerbarkeit des Magnetfelds, der Magnetfeldtiefen und in der möglichen Betromungsdauer die bis zu 100% ED betragen kann.

EHG electromagnetic holding rods are used in fixture construction, for gripper systems and for a wide variety of tasks in mechanical engineering. EHG holding rods consist of a screwed, two-part system, are double-coated and sealed to IP 65. Max. Operating temperature 60°C Standard voltage 24,48,110V DC Protection class IP 53 ED 100%

FXE Elektro-Permanent Lasthebemagnete von Flaig Magnetsysteme setzen seit über 20 Jahren Standards. Elektro-Permanent Lasthebemagnete sind die beste Wahl wenn: die zu bewegende Last für Permanentmagnete zu groß ist der Lasthebemagnet ergonomisch bedient und gesteuert werden muss die Geometrie der Last nicht zu Permanentmagneten passt der Lasthebemagnet ferngesteuert und eventuell lastregulierbar sein muss die Traglast im Verhältnis zur Materialstärke für Permanentmagnete zu groß ist

Permanent magnetic chucks type PMNEO are super strong, compact plates for heavy cutting. Parts from about 30x15x6mm can be stretched with max. achievable holding forces. Good holding forces can be achieved even on rough surfaces. Optional pole blocks can be built on the PMNEO. This allows turning up the workpiece so that all sides are freely accessible, can be drilled on the magnetic clamping plate and leaves more space for accumulating chips around the component. This allows long-running HSC milling-pieces never sink into the resulting chips. The chipboard is activated via a removable hex shifter. The PMNEO magnetic clamping plate, in 48mm height, is prepared to integrate reference elements directly into the magnetic chuck, so that no additional spectrum is required underneath the magnet.

The systems will be delivered inclusive a suited counterpiece. The coating has a rubber cap for damping function and aesthetic improvement. Article number:MBS12x12 D mm:12 L mm:12.5 Weight g:12.5 Temperature °C:60

FX-VV HOT for hot parts. A special permanent magnet system allows working temperatures of up to 300°C for a maximum of 5 minutes and of 250°C permanently. Ideal for moving heated tools and dies, or heat-treated workpieces. The FX-VV HOT holds what others drop. We offer a wide range of Permanent Lifting Magnets.

FXE-TT telescopic trusses are equipped with electro-hydraulic telescopic arms and are suitable for handling sheets of 3-16m length. The system consists of fixed and movable crossbars, each equipped with two magnetic modules. The length of the truss can be adjusted individually via radio remote control. The magnetic system can be operated on the truss itself or on the radio remote control included in the delivery.

FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

Magnetic door catch, with round contact poles and a... Article number:MTS60x32x25-Nd L mm:60 l mm:16 B mm:25 b mm:15.5 d2 mm:5.5 W mm:46.5 Force* N:150 Weight g:71 Temperature °C:60

FXL magnetic clamping blocks are available in many sizes and designs. They can be manufactured with one or more clamping surfaces and different pole sizes. As with the FXL magnetic clamping plates, they are controlled by an FXL-C control unit; optionally with only one channel or also with several channels in order to be able to control the individual clamping surfaces of a block separately.

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets